First
of all this is the X3LCD kit. You get the custom
manufactured LCD
screen and the i/o cable to connect
the X3LCD to the X3 Modchip.
The X3
Modchip has hardware controlled contrast adjuster. Also
note where
the LCD I/O Cable plugs into the
mod.
This is
where the LCD I/O Cable plugs into the
X3.
This is
where the LCD I/O Cable plugs into the X3LCD.
You now
need to enable the X3LCD in X3 Config Live. This is what
your first
screen should look like - select
"Settings"
Select
"LCD Settings"
The LCD
screen is turned off by default. Press "A" to enable
it.
Now the
LCD is enabled. The LCD brightness level is set to 100%
by default
as this looks the best. However you can
adjust it if you wish to.
You can even
customize the startup text to say anything you
like.
You are
allowed 19 characters. Use your imagination
;)
If
everything has gone to plan then this is how your LCD
screen should look.
This
should give you an idea of how Xecuter customers are
fitting the LCD
screens. They all seem to be using
Dremmels to cut out the hole. Make sure
you protect
the back of the X3LCD against any shorts when fitting to
the
Xbox. Physical damage from shorts will not be
subject to a warranty.
|
